RED & WHITE JERSEY MEASURING GUIDELINES

 

MEASUREMENT GUIDE TO ASSIST WITH LEASIDE WHITE or RED JERSEYS

***PLEASE NOTE THIS FITS DIFFERENT THAN THE BLACK JERSEY****

*****Please note that the cutting and sewing of hockey jerseys is not always precise. Sizes may vary an inch or two in either direction (smaller or larger).*****

  1. Turn your current jersey inside out.
  2. Lay the jersey on a flat surface.
  3. Make sure the jersey is completely flat before measuring.
  4. Lay a measuring tape across the chest, just below the underarm as shown. The measurement should be taken from the inside of the seam/stitches.
  5. Take the measurement across the chest (22” in the photo example)and multiply that by 2. This will give you the total chest measurment (44” in this example). 

red.png

6.  Reference the Kobe sizing chart  - Now that you have confirmed your chest measurement and garment measurement, reference the KOBE sizing chart.

7.  Using the example above, if you have a current Youth XL and it just fits. Consider ordering up a size to an adult Small.

kobe.png

8.  If you are still stuck or have questions, please do not hesitate to contact Nancy at 416-439-9400 x 259 to book a fitting

There are no products listed under this category.